- 4 Analog Cheater Cord
- Universal Wiring Harness Designed To Work With Any 568a Or 568b Network Cabling Plan
- 12 Inch In Length And Designed To Split A Standard Single Ethernet Cable Into 4 Separate Circuits So As To Avoid Running Additional Cables For Expansion. Typically The Male Plug Of One Ez80003333 Cheater Cord Is Inserted Into An Outlet On The House Patch Panel (near The Data Switch Or Router). Then The 4 Jacks Of The Cord Are Fed By 4 Different Signals Such As Generic Single Line Telephones Single Central Office Trunks Or Digital Pbx Extension Circuits That Use Pins 4 & 5 (like Nec & Avaya). Another Ez80003333 Cheater Cord Is Then Plugged Into The Wall Outlet At The Destination Location Where Its Broken Down Into 4 Separate Jacks And 4 Separate Circuits Again
- Jack #1: Pins 4 &5 = C.o. Trunks 2wire Telephones Fax Machines Modems Pos Anything That Use The Center Pair (pins 4&5)
- Jack #2: Pins 4 &5 = C.o. Trunks 2wire Telephones Fax Machines Modems Pos Anything That Use The Center Pair (pins 4&5)
- Jack #3: Pins 4 &5 = C.o. Trunks 2wire Telephones Fax Machines Modems Pos Anything That Use The Center Pair (pins 4&5)
- Jack #4: Pins 4 &5 = C.o. Trunks 2wire Telephones Fax Machines Modems Pos Anything That Use The Center Pair (pins 4&5)
- The Final Result Is A Universal Wiring Scheme That Can Be Plugged Directly Into Any 568a Or 568b Patch Panel
- Each Ez80003333 Cheater Cord Has An 8pin Rj45 Plug And Four (4) 8pin Rj45 Jacks That Are Colorcoded In Black With The Single Term 2wtel For Ez Identification.
- Brand: Ezcords
