- Steel Touch-free Voip Entry Phone
- Touchfree Motion Sensor With Adjustable Range From One To Four Inches
- Motion Sensors Ring Led Lights Blue During Idle Flashes Green During Dialing And Lights Steady Green When Call Is Answered
- Automatic Polling And Programming Software Included
- 2 Amp Relay Contacts For Door/gate Or Sl2 Strobe Light Control
- Sip Compliant
- Outbound Proxy Authentication Id Peer To Peer Vlan Tagging
- Poe Powered (class 1 <4 Watts)
- Automatic Noise Canceling (anc) For Proper Operation In Noisy Environments
- Voip Eliminates The Need For Push To Talk Mode
- Network Downloadable Firmware
- T10 Torx Security Screws For Added Security
- Can Be Used With Optional Rc4a Secure Relay Controller
- Marine Grade 316 Stainless Steel Prevents Corrosion On Stainless Steel Models
- Laser Etched Graphics On Stainless Steel Models
- Programmable To Dial Up To 5 Numbers On Busy Or Ring No Answer
- Cycles Through Backup Phone Numbers On Busy Or Noanswer
- Optional Enhanced Weather Protection (ewp) Ewp Products Are Designed To Meet Ip66 Ingress Protection Rating See Dod 859
- Hangs Up On Busy Signal Timeout Or Touch Tone Command
- Remotely Programmable
- Extended Temperature Range Of 40f To 140f
- Volume Adjustments For Microphone And Speaker
- Flush Mount Using The Included Roughin Box Or Can Be Surface Mounted Using An Optional Ve55 Surface Mount Box
- Diagnostics For Testing Microphone Speaker And Relay
- Brand: Viking Electronics
