- Sangoma A200 Pci Base Analog Card Ec/hw
- From 2 To 24 Ports Supported Mixing Fxo And Fxs Interfaces As Required
- Support For The Asterisk Freeswitch Yate Callweaver Pbx/ivr Projects As Well As Other Open Source And Proprietary Pbx/switch/ivr/voip Gateway Applications
- Single Synchronous Pci And Pci Express Interface For All 24 Fxo/fxs Ports
- Four Rj11 Ports Per Remora Card
- Dimensions: 2u Form Factor: 120 Mm X 55 Mm For Use In Restricted Chassis
- Short 2u Compatible Mounting Clips Available For Installation In 2u Rackmount Servers
- 32 Bit Bus Master Dma Data Exchanges Across Pci Interface At 132mbytes/sec For Minimum Host Processor Intervention
- Autosense Compatibility With 5 V And 3.3 V Pci Busses
- Fully Pci 2.2 And Pci Express Compliant Compatible With All Commercially Available Motherboards Proper Sharing Of Pci Interrupts
- Intelligent Hardware: Downloadable Field Programmable Gate Array Programming With Multiple Operating Modes. Field Upgradeable So That New Features Can Be Added When They Become Available
- Maximum Operational Power For Pci: 3.75 W (0.75 A @ 5 V) + 4.2 W (0.35 A @ 12 V) Per Fxs Module
- For Pci Express: 2.64 W (0.8 A @ 3.3 V) + 4.2 W (0.35 A @ 12 V) Per Fxs Module
- Temperature Range: 0 50c
- Shipped With Standard Rj11terminated Cables
- The A200 Consists Of A Remora Daughterboard Mounted On The Aft Pci Card. The Remora Card Has Two Sockets Each Of Which Can Accept A Fxo2 Or Fxs2 Module. Each Fxo2 Or Fxs2 Module Supports Two Fxo Or Fxs Lines Respectively
- Up To Five Additional Remora Daughterboards Can Be Mounted In Empty Slot Positions Beside The A200 Assembly Connected To The A200 By A Backplane Bus Connector.
- Brand: Sangoma Technologies Inc