- Led Strobe Light Kit
- Ringing Phone Or Tty Indication For The Hearing Impaired
- Ringing Phone Indication In Loud Warehouses And Factories
- Emergency Illumination For Emergency Phones In Elevators Campuses Hallways Parking Ramps Etc.
- Alarm Indication For Security Systems Or Alarm Panels With Phone Dialers
- Durable Polycarbonate Lens
- High Output Long Life Led Technology
- Four Programmable Flash Patterns: Single Flash Double Flash Quad Flash Flicker Flash
- 6 Programmable Beacon And Strobe Brightness Settings
- Immune To Shock And Vibration
- Flush Mount Or Surface Mount With Weatherproof Single Gang Box (included)
- 3/4 Knockouts For Connecting Conduit Etc.
- Strobe And Control Module May Be Installed Separately
- Can Be Configured To Signal: Ringing Offhook A Combination Of Both Ringing And Offhook (line Inuse) Or Triggered From A Contact Closure
- One Set Of (no) Normally Open And (nc) Normally Closed Relay Contacts Provided
- Selectable Ring Cadence Mode (strobe Light Will Remain Flashing Between Rings)
- Switched 12v Dc Output (follows Relay Activation For Powering Strobe Lights Cameras Etc.)
- On/off Switches For Ring Detection And Offhook/loop Detection
- Disable Input Ideal For Use With Twobutton Emergency Phones Like Vikings E160020a (dod# 215) Will Not Activate Strobe Light On Info Calls
- Power: 120v Ac To 12v Dc Adapter Provided
- Maximum Power Supply Run Length On Cat5: 1 Pair = 125 Ft 2 Pair = 225 Ft 3 Pair = 325 Ft 4 Pair = 475 Ft
- Maximum Sl2 Wire Run Length On Cat5: 3 Wires = 100 Ft 6 Wires = 300 Ft
- Strobe Dimensions: 111mm Diameter X 69mm (4.38inch X 2.75inch)
- Control Module Dimensions: 74mm X 53mm X 25mm (2.9inch X 2.1inch X 1.0)
- Shipping Weight: 1.5 Kg (3.3 Lbs)
- Operating Temperature: 26 To 54c (15 To 130 F)
- Relay Contact Rating: .5a @ 125v Ac/1a @ 30v Dc
- Minimum Loop Current: 15 Ma
- Minimum Ring Voltage: 25v Rms
- Ringer Equivalence: 0.5 A Ren
- Disable/info Switch Input: 50ma/80mw Maximum
- Humidity Blk4: 5% To 95% Noncondensing
- Mounting: Fasten To Wall Post Etc. With Complete Surface Mounting Hardware Included
- Connections: Color Coded Wires With Gelfilled Butt Connectors
- Brand: Viking Electronics
